Side in which trusses are placed from a reference line when placing individual or groups of trusses. Choices are Center (placed centered on reference line), Dir of (pulled to the same side as selected), or Opposite (pulled to the opposite side as selected).
Num Plys - First Truss
Ply count of the first truss in the run of trusses to the default value
Num Plys - Last Truss
Ply count of the last truss in the run of trusses to the default value
Num Plys - All Other
Ply count of the all trusses in the middle of the run of trusses to the default value
Flat Truss Depth
Creates a run of trusses with a flat top chord with specified depth from this value
Flat Truss Elev
Used with Flat truss depth to hold bottom chord at specified plate height. This can be used to create a box girder above plate height.
Flat Truss Name
Sets flat truss name default to Truss, Header, or Beam
Is first truss a girder?
Sets first truss in the run to a girder
Is last truss a girder?
Sets last truss in the run to a girder
Are other trusses girders?
Sets trusses in between first and last truss to a girder